Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Jonathan Fish

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Shift the rear derailleur into the highest (smallest) gear.
[* red] Align the rear guide sprocket of the derailleur with the highest (smallest) gear, by tightening or loosening the screw labeled "H".
[* yellow] The second picture is of a misaligned derailleur.
[* icon_note] Note:ThisThis alignment sets the maximum outward distance that the derailleur can move the chain. Without setting this boundary, the derailleur could shift the bike chain off of the sprocketgear and onto the axle. This boundary setting is referred to as the high end adjustment stop.
[* icon_note] Note:ThisThis alignment sets the maximum outward distance that the derailleur can move the chain. Without setting this boundary, the derailleur could shift the bike chain off of the sprocketgear and onto the axle. This boundary setting is referred to as the high end adjustment stop.