Ga door naar hoofdinhoud

Wijzigingen in stap #9

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] A couple Phillips screws secure the IR sensor and RF transceiver boards to the lower case.
[*
black] blahBefore the IR sensor board can be removed, the RF transceiver board must be lifted off the pins connecting it to the main board.
[* orange] A Nordic Semiconductor 24LU1 RF transceiver is attached to the top of the board. This chip is responsible for receiving signals from the wireless keyboard.
[* red] A couple Phillips screws secure the IR sensor and RF transceiver boards to the lower case.
[*
black] blahBefore the IR sensor board can be removed, the RF transceiver board must be lifted off the pins connecting it to the main board.
[* orange] A Nordic Semiconductor 24LU1 RF transceiver is attached to the top of the board. This chip is responsible for receiving signals from the wireless keyboard.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie