Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Brett Hartt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Next, a spudger is used to disconnect the Wi-Fi antenna cable.
[* icon_note] This typestyle of antenna[http://www.wellshow.com/rf-connectors/mini-connector/ipex-mhf3-mini-connector/|IPEX MHF] connector is widely used in the electronics worldworld as an antenna connector.
[* icon_note] This typestyle of antenna[http://www.wellshow.com/rf-connectors/mini-connector/ipex-mhf3-mini-connector/|IPEX MHF] connector is widely used in the electronics worldworld as an antenna connector.
[* black] A #1 Phillips screwdriver makes short work of the single screw securing the Wi-Fi card to the lower case.
[* black] Finally, the Wi-Fi card can be lifted off the pins connecting it to the main board.