Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] RemovingNext, a spudger is used to disconnect the Wi-Fi antenna cable.
[* icon_note] This type of antenna connector is widely used in the electronics world.
[* black] A #1 Phillips screwdriver makes short work of the single screw securing
the Wi-Fi card fromto the unitlower case.
[* black] Finally
, the only green in a sea of blueWi-Fi card can be lifted off the pins connecting it to the main board.
[* black] RemovingNext, a spudger is used to disconnect the Wi-Fi antenna cable.
[* icon_note] This type of antenna connector is widely used in the electronics world.
[* black] A #1 Phillips screwdriver makes short work of the single screw securing
the Wi-Fi card fromto the unitlower case.
[* black] Finally
, the only green in a sea of blueWi-Fi card can be lifted off the pins connecting it to the main board.