Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Tim

Bewerking geweigerd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove 4 screws:
[* red] Three 3.9mm screws using Phillips #1 screwdriver
[* blue] One 4.7mm screw using Phillips #0 screwdriver
+ [* black] If you are replacing an SSD, then you need go no further, and you needn't unlink the display or speaker: the SSD is held by two screws and the same ribbon cable that would connect a hard drive to the motherboard.