Skip to main content

Wijzigingen aan stap #3

Bewerking door Courtney Crockett

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* blackblue] Insert the flat end of a spudgerscrewdriver in between the lower casecasing and lower front panel near the top right corner of the DSi.
[* blackgreen] Carefully run the spudgerflat screwdriver along the right edge of the DSiouter casing, creating an opening inbetween the body and the processcasing.
[* blackgreen] Continue running the spudger alongflat screwdriver around the backsidebody of the DSi until the majority of the lower case has been separated from the lower front panelseparated.
[* blackblue] Insert the flat end of a spudgerscrewdriver in between the lower casecasing and lower front panel near the top right corner of the DSi.
[* blackgreen] Carefully run the spudgerflat screwdriver along the right edge of the DSiouter casing, creating an opening inbetween the body and the processcasing.
[* blackgreen] Continue running the spudger alongflat screwdriver around the backsidebody of the DSi until the majority of the lower case has been separated from the lower front panelseparated.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie