Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Amy Justice

Bewerking goedgekeurd door Amy Justice

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[title] Removing Top Shell
[* black] Grab your Phillips #00 tool and remove the screw located at the top middle of the camera.
[* blackicon_note] There is a ribbon wire on the top right. Make sure to disconnect the ribbon wire as you did in the previous step.
[* blackicon_note] There is a ribbon wire on the top right. Make sure to disconnect the ribbon wire as you did in the previous step.
[* black] Slowly and carefully pull up.