Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #7

Bewerking door Elizabeth Kamine

Bewerking goedgekeurd door Elizabeth Kamine

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the plastic stoppers on either side of the metal flash bulb tray.
[* red] Using a soldering iron, desolder each of the wires connected to the light bulb.
[* icon_caution] Be careful! The soldering iron is hot. Do not burn yourself or the device. It should not be applied to the device too long to avoid damaging any of the device components.
[* icon_note] For a comprehensive guide on desoldering, visit [guide|750|iFixit's Soldering and Desoldering Guide].