Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Elizabeth Kamine

Bewerking goedgekeurd door Elizabeth Kamine

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly, keep track of the screws and their corresponding locations.
[* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps.
[* red] Remove both 4.5 mm screws holding the bottom into place.
[* orange] Remove both 4.5 mm screws holding the side into place.
[* yellow] Remove the 4.5 mm screw underneath the A/V flap.
[* green] Remove the 4.0 mm screw on the left-side wrist strap loop.