Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Elizabeth Kamine

Bewerking goedgekeurd door Elizabeth Kamine

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using a Phillips #000 Precision Screw DriverScrewdriver, remove both 4.5 mm screws holding the bottom into place.
[* red] Using a Phillips #000 Precision Screw DriverScrewdriver, remove both 4.5 mm screws holding the bottom into place.
[* orange] Remove both 4.5 mm screws holding the side into place.
[* yellow] Also be sure to removeRemove the 4.5 mm screw underneath the A/V flap.
[* green] Finally, removeRemove the 4.0 mm screw on the left-side wrist strap loop.
[* yellow] Also be sure to removeRemove the 4.5 mm screw underneath the A/V flap.
[* green] Finally, removeRemove the 4.0 mm screw on the left-side wrist strap loop.