Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #7

Bewerking door VisualSmith

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Clean and remove any remaining solder or debris from the area.
[* black] Cut the leads on thenew capacitors to fit.
[* black] Clean and remove any remaining solder or debris from the area.
[* black] Cut the leads on thenew capacitors to fit.
[* black] Solder the four new capacitors in place.
[* black] Notice: Pay attention to the polarity of the capacitors.
[* black] Insulate the leads and gently bend the capacitors to fit.