Ga door naar hoofdinhoud

Wijzigingen in stap #5

Bewerken voor VisualSmith

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Unscrew all for phillips head screw in each corner (green highlight).
[* black] Disconnect power cable (yellow highlight).
[* black] Lift and remove the clear front plastic lens cover.
[* black] Lift the circuit board and camera assebly out of the case.
[* black] Carefully separate the LED assembly from the four small connectors (highlighted in blue). Note: This step is not required for this repair. However, it reduces the possibility of inadvertent damage during the process.
[* black] Carefully separate the LED assembly from the four small connectors (highlighted in blue). Note: This step is not required for this repair. However, it reduces the possibility of inadvertent damage during the process.