Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Jim Bui

Bewerking goedgekeurd door Jim Bui

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] It is not requiredblack] Lift the screen up and swing it to detach the right, exposing the circuit board underneath.
[* icon_note] The navigation should still be attached to the circuit board with a
ribbon cable for the LCD screen markedas indicated in red if you are replacing the navigation panelred.
[* red] Removeorange] Detach the ribbon cable fromthat is connecting the circuit board by lifting the socket up and pulling out the cable.
[* black] The
LCD screen is now disconnected fromand the camera.
[* icon_note] The navigation panel is connected to the socket marked by a blue box
circuit board.
[* icon_note] It is not requiredblack] Lift the screen up and swing it to detach the right, exposing the circuit board underneath.
[* icon_note] The navigation should still be attached to the circuit board with a
ribbon cable for the LCD screen markedas indicated in red if you are replacing the navigation panelred.
[* red] Removeorange] Detach the ribbon cable fromthat is connecting the circuit board by lifting the socket up and pulling out the cable.
[* black] The
LCD screen is now disconnected fromand the camera.
[* icon_note] The navigation panel is connected to the socket marked by a blue box
circuit board.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Geen vorige afbeelding

Toegevoegd