Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door mayer

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] There are two RAM slots. Release the RAM by pushing the white outer tabs. Then pull the RAM straight out.
[* black] Place new RAM in slots and press with both thumbs on each end till you feel them seat.
-[* black] Replace the access panel. Start up and go under the Apple to "about this Mac" and check to see that the RAM is being seen.
+[* black] Replace the access panel. Turn it over and plug it in. Start up and go under the Apple to "about this Mac" and check to see that the RAM is being seen.