Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #3

Bewerking door Max Monty

Wachtend op goedkeuring


Stap regels

[* black] Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand.
[* icon_caution] Do not excessively bend the logic board, as it is very thin and fragile.
[* black] Note the ribbon cable on the iPod's left side at the volume buttons. This ribbon can not be disconnected. Do not break it.
[* black] While gently lifting the logic board with one hand, use an iPod opening tool to lift the logic board near the copper tape at the logic board's top edge.
[* black] The logic board will be lifted adequately when the last display assembly connector has cleared the top edge of the rear case.