Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #3

Bewerking door John

Bewerking goedgekeurd door Andrew Optimus Goldheart


Stap regels

[* black] Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand.
[* icon_caution] Do not excessively bend the logic board, as it is very thin and fragile.
[* yellow] Be very careful not to lift too much as the volume control ribbon cable is still connected and will tear '''very''' easily.
[* black] While gently lifting the logic board with one hand, use an iPod opening tool to lift the logic board near the copper tape at the logic board's top edge.
[* black] The logic board will be lifted adequately when the last display assembly connector has cleared the top edge of the rear case.

Afbeelding 2

Oude versie

Nieuwe versie