Wijzigingen aan stap #17
Bewerken voor Miroslav Djuric —
Bewerking goedgekeurd door Miroslav Djuric
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] The circle pad consists of a small, donut-ish PCB with traces, a backing plate, and the spring-loaded X-Y sliders. | |
| [* black] The X-Y sliders each have two metal contacts that are always touching the PCB. | |
| [* black] As you move the sliders up/down and left/right, the metal contacts are on the sliders are adjusting the resistance of the circuit on the PCB. | |
| [* black] This, in turn, is registered as movement in whatever game you're playing. | |
| + | [* black] Now, on to the spring-loaded sliders. A spring inside the mechanism makes the "stick" always return to center. If you wanted to convert the circle pad to more of a "throttle" type joystick — where it doesn't return to center manually — all you would have to do is take the circle pad apart and remove the spring found within. |
| + | [* black] This is a precarious undertaking only for the truly dedicated among us. The rest should live with its spring-loaded goodness. |