Ga door naar hoofdinhoud

Wijzigingen aan stap #45

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board.
[* black] Pry the logic board up enough to grab it with your fingers.
[* icon_caution] Be extremely careful not to damage the rear-facing camera cable, or any logic board components.
[* icon_note] If the logic board does nonot lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.
[* icon_note] If the logic board does nonot lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.