Ga door naar hoofdinhoud

Wijzigingen aan stap #39

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] The logic board is held in place by two strips of adhesive.
[* red] One under the upper component tab, and one under the Lightning connector ribbon cable.
[* blackicon_caution] In the following steps only pry ''only'' where directed so as to avoid damaging your logic board.
[* blackicon_caution] In the following steps only pry ''only'' where directed so as to avoid damaging your logic board.