Ga door naar hoofdinhoud

Wijzigingen aan stap #27

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
[* black] Flip the iPad back over and insertInsert a plastic card betweenunder the logic board side, speakerbattery from the Lightning cable connector end of the battery and the rear caseiPad.
[* black] Flip the iPad back over and insertInsert a plastic card betweenunder the logic board side, speakerbattery from the Lightning cable connector end of the battery and the rear caseiPad.
[* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.