Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Phil

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Slightly tilt the steel mid plane to dislodge it from the rear case.
-[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.
+[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. This can often be accidently glued to the steel plate and easily ripped.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera.