Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slightly tilt the steel mid plane to dislodge it from the rear case.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.
[*
black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape gluedstuck to the rear facing camera.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.
[*
black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape gluedstuck to the rear facing camera.