Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Philip Brasch

Bewerking geweigerd door Jake Devincenzi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slightly tilt the steel mid plane to dislodge it from the rear case.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. If you've completed step 6 properly, this won't be an issue.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera. (See step 6.)
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. If you've completed step 6 properly, this won't be an issue.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera. (See step 6.)

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie