Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Phil

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert the edge of an iPod opening tool under the steel mid plane near the bottom left corner of the Touch.
[* black] Pry upward to separate the plate from the adhesive securing it to the plastic inner case. Pry in between the plate and the speaker unit to leave the speaker behind in the case.
[* black] Pry upward to separate the plate from the adhesive securing it to the plastic inner case. Pry in between the plate and the speaker unit to leave the speaker behind in the case.
[* icon_caution] Use extreme care, the speaker is under the area shown in photo. It is connected with very thin and short wires.