Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door asle

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert the edge of an iPod opening tool under the steel mid plane near the bottom left corner of the Touch.
[* black] Pry upward to separate the plate from the adhesive securing it to the plastic inner case.
[* icon_caution] Use extreme care, the speaker is under the area shown in photo. It is connected with very thin and short wires. Take it easy as the volume/sleep cable easily sticks to the plane and can be ripped off when lifting the plane on this picture. Pry up gently noticing the cable is not pulled up.
[* icon_caution] Use extreme care, the speaker is under the area shown in photo. It is connected with very thin and short wires. Take it easy as the volume/sleep cable easily sticks to the plane and can be ripped off when lifting the plane on this picture. Pry up gently noticing the cable is not pulled up.