Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door stan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert the edge of an iPod opening tool under the steel mid plane near the bottom left corner of the Touch.
[* black] Pry upward to separate the plate from the adhesive securing it to the plastic inner case.
[* icon_cautionyellow] Use extreme care, the speaker is under the area shown in photophoto and sticks to the plate. It is connected with very thin and short wires. Be sure to separate the speaker from the plate before trying to lift it.
[* icon_cautionyellow] Use extreme care, the speaker is under the area shown in photophoto and sticks to the plate. It is connected with very thin and short wires. Be sure to separate the speaker from the plate before trying to lift it.
[* orange] There is a very thin ribbon cable here that connects the volume and power buttons to the logic board. Try to work around this area like shown so not to rip the cable. It is extremely fragile.

Afbeelding 1

Oude versie

Nieuwe versie