Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Phil

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.
[* black] Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.
[* icon_caution] Do not try to pry between the black plastic bezel and the steel rear case.
[* black] Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.
[* icon_note] If itthe glass is too difficult toalready broken or cracked pry up the front panel assembly, reheat it and try again.larger unbroken areas as these will give the best leverage. use a vacuum to remove shards as you progress
[* icon_note] If itthe glass is too difficult toalready broken or cracked pry up the front panel assembly, reheat it and try again.larger unbroken areas as these will give the best leverage. use a vacuum to remove shards as you progress