Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.
[*
black] Insert wisdom hereWith the heat gun set on "low", begin heating the lower portion of the Touch near the home button.
[* icon_reminder] It is suggested to heat the desired portion in a circular motion pattern, so as to evenly dissipate the amount of heat throughout the device
.
[* icon_note] The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.
[*
black] Insert wisdom hereWith the heat gun set on "low", begin heating the lower portion of the Touch near the home button.
[* icon_reminder] It is suggested to heat the desired portion in a circular motion pattern, so as to evenly dissipate the amount of heat throughout the device
.