Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Vanessa

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] While the front panel is still warm, use the edge of an iPod opening tool to pry it from the headphone jack side of the front panel assembly out of the Nano.
[* icon_caution] Do not attempt to pry out the front panel assembly fromfrom, or insert the opening tool into the left side of the devicedisplay, as the display data cable is right underneath and may be damaged in the process.
[* icon_caution] Do not attempt to pry out the front panel assembly fromfrom, or insert the opening tool into the left side of the devicedisplay, as the display data cable is right underneath and may be damaged in the process.
[* black] Continue prying the perimeter of the front panel assembly out of the outer casing, being careful not to damage the display data cable held under its left edge.
[* icon_note] If the front panel is excessively difficult to lift out of the outer case, reheat the area and try again.