Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] While the front panel is still warm, use the edge of an iPod opening tool to pry it from the headphone jack side of the front panel assembly out of the Nano.
[* icon_caution] Do not attempt to pry out the front panel assembly from the left side of the device, as the display data cable may be damageddamaged in the process.
[* black] While the front panel is still warm, use the edge of an iPod opening tool to pry it from the headphone jack side of the front panel assembly out of the Nano.
[* icon_caution] Do not attempt to pry out the front panel assembly from the left side of the device, as the display data cable may be damageddamaged in the process.
[* black] Continue prying the perimeter of the front panel assembly out of the outer casing, being careful not to damage the display data cable held under its left edge.
[* icon_note] If the front panel is excessively difficult to lift out of the outer case, reheat the area and try again.