Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door hilerm

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully remove the metal clip from atop the rear-facing camera and set it aside. You'll be placing it back during reassembly.
+[* black] After removing the clip, carefully pry the rear-facing camera away from the case.
+ [* black] Be careful not to pry on the metal top. Doing so may damage the camera.
+ [* black] Pry from the upper side and far enough down to pry against the plastic side. You only want to loosen the camera from the case.