Ga door naar hoofdinhoud

Wijzigingen aan stap #24

Bewerking door MICHAEL EMINESCU

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] iPod Touch 4th Generation Repairability: ***4 out of 10*** (10 is easiest to repair)
-[* green] Good: Opening the device is pretty straightforward, as long as you have a heat gun and some iPod Touch opening tools handy.
-[* green] Good: The headphone jack is not soldered to the logic board, a first for the iPod Touch line.
-[* red] Bad: The front glass and LCD are permanently fused together, increasing the cost of repairing broken front glass.
-[* red] Bad: Removing the display completely requires removing the logic board
-[* red] Bad: Apple soldered the volume button and sleep button cable to the logic board. The previous Touch had a ZIF connector. This makes removing logic board very difficult.
-[* red] Bad: The battery is still soldered to the logic board, just like previous models.
+[* green] Opening the device is pretty straightforward, as long as you have a heat gun and some iPod Touch opening tools handy.
+[* green] The headphone jack is not soldered to the logic board, a first for the iPod Touch line.
+[* red] The front glass and LCD are permanently fused together, increasing the cost of repairing broken front glass.
+[* red] Removing the display completely requires removing the logic board.
+[* red] Apple soldered the volume button and sleep button cable to the logic board. The previous Touch had a ZIF connector. This makes removing logic board very difficult.
+[* red] The battery is still soldered to the logic board, just like previous models.