Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door support

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Enough of the exterior, let's get inside...
[* black] There are no visible screws. We'll have to figure out what combination of glue, tabs, and magic Apple used to hold the Touch together.
[* black] We first used a [product|IF145-031|heat gun] to soften the adhesive holding the display assembly in place.
-[* black] Next, we ran a [product|IF145-000|iPod Touch opening tool] around the edge to separate the adhesive.
+[* black] Next, we ran a [product|IF145-000|iPod Touch opening tool] around the edge to separate the adhesive. There are hinges at the top of the ipod that hold the screen to the body. So you need to open it from the bottom towards the top.