Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Enough of the exterior, let's get inside...
[* black] There are no visible screws. We'll have to figure out what combination of glue, tabs, and magic Apple used to hold the Touch together.
[* black] We first used a [product|IF145-031|heat gun] to soften the adhesive holding the display assembly in place.
-[* black] Next, we ran a [product|IF145-000|plastic opening tool] around the edge to separate the adhesive.
+[* black] Next, we ran a [product|IF145-000|iPod Touch opening tool] around the edge to separate the adhesive.