Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Disconnect the 13 indicated cables, removing tape as necessary.
[* blackicon_note] When re-installing the board, make sure the two small connectors at the right hand side are above the board before inserting the screws.
[* blackicon_note] When re-installing the board, make sure the two small connectors at the right hand side are above the board before inserting the screws.