Wijzigingen aan stap #7
Bewerken voor Clay Eickemeyer —
Bewerking goedgekeurd door Clay Eickemeyer
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* red] Remove the two 8.2 mm Tri-Wing screws hidden under the feet you just removed. Use the 4mm nut driver included in the repair kit to extend the Y tip down into the hole in order to reach the recessed screws. |
|---|---|
| + | [* red] Remove the two 8.2 mm Tri-Wing screws hidden under the feet you just removed. |
| + | [* icon_note] You may use a 4 mm hex driver to extend your bit into the recesses and reach the screws. |