Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Disconnect the hard drive cable from the hard drive by applying even pressure on both sides while maintaining a firm grip on the drive itself. You may need to remove a piece of orange tape attaching the ribbon cable to the hard drive.
[* icon_note] This is a bit tricky. Try holding the drive against your body while pushing the cable away from you, or rocking the cable gently from side to side while applying even pressure, or both. If you bend the pins, do your best to straighten them, using the hard drive cable as a guide.
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd