Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom hereicon_reminder] To reinstall the x clamp, first start by attaching two corners to the posts on the heatsink.
[* icon_reminder] While holding the third arm of the x clamp down against the post attached to the heat sink, use a small flathead screwdriver to pry the x clamp away from the heat sink post.
[* icon_reminder] As you pry, press down on the arm of the x clamp until you "walk" it down into the retaining groove cut into the post attached to the heat sink.
[* icon_note] Repeat this process for the fourth arm of the x clamp
.
[* black] Insert wisdom hereicon_reminder] To reinstall the x clamp, first start by attaching two corners to the posts on the heatsink.
[* icon_reminder] While holding the third arm of the x clamp down against the post attached to the heat sink, use a small flathead screwdriver to pry the x clamp away from the heat sink post.
[* icon_reminder] As you pry, press down on the arm of the x clamp until you "walk" it down into the retaining groove cut into the post attached to the heat sink.
[* icon_note] Repeat this process for the fourth arm of the x clamp
.