Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert your screwdriver parallel to the logic board between the xX clamp and its retaining post.
[* black] Twist the screwdriver to fully release the xX clamp from its retaining post.
[* icon_note] Repeat this process for all four corners of the xX clamp.
[* icon_caution] When removing the last corner of the xX clamp and holding the logic board upside down, be sure to catch the CPU heat sink to avoid damage from it falling.
[* black] Insert your screwdriver parallel to the logic board between the xX clamp and its retaining post.
[* black] Twist the screwdriver to fully release the xX clamp from its retaining post.
[* icon_note] Repeat this process for all four corners of the xX clamp.
[* icon_caution] When removing the last corner of the xX clamp and holding the logic board upside down, be sure to catch the CPU heat sink to avoid damage from it falling.