Wijzigingen aan stap #2
Bewerking door Andrew Bookholt —
- Verwijderd
- Toegevoegd
- Ongewijzigd
Stap regels
[* black] Insert [* black] Twist the screwdriver to fully release the x clamp from its retaining post. [* icon_note] Repeat this process for all four corners of the x clamp. [* icon_caution] When removing the last corner of the x clamp and holding the logic board upside down, be sure to catch the CPU heatsink to avoid damage from it falling. |
[* black] Insert [* black] Twist the screwdriver to fully release the x clamp from its retaining post. [* icon_note] Repeat this process for all four corners of the x clamp. [* icon_caution] When removing the last corner of the x clamp and holding the logic board upside down, be sure to catch the CPU heatsink to avoid damage from it falling. |