Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert the tip of a small flathead screwdriver between the xX clamp and its retaining post on the heat sink.
[* black] Pry the xX clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.
[* black] Insert the tip of a small flathead screwdriver between the xX clamp and its retaining post on the heat sink.
[* black] Pry the xX clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.