Xbox 360 CPU Heat Sink Replacement stap #3 geschiedenis

Wijzigingen aan stap #3

Bewerken voor Walter Galan — 21 jul. 2010

-	[* icon_reminder] To reinstall the x clamp, first start by attaching two corners to the posts on the heat sink.
-	[* icon_reminder] While holding the third arm of the x clamp down against the post attached to the heat sink, use a small flathead screwdriver to pry the x clamp away from the heat sink post.
-	[* icon_reminder] As you pry, press down on the arm of the x clamp until you "walk" it down into the retaining groove cut into the post attached to the heat sink.
-	[* icon_note] Repeat this process for the fourth arm of the x clamp.
+	[* icon_reminder] To reinstall the X clamp, first start by attaching two corners to the posts on the heat sink.
+	[* icon_reminder] While holding the third arm of the X clamp down against the post attached to the heat sink, use a small flathead screwdriver to pry the X clamp away from the heat sink post.
+	[* icon_reminder] As you pry, press down on the arm of the X clamp until you "walk" it down into the retaining groove cut into the post attached to the heat sink.
+	[* icon_note] Repeat this process for the fourth arm of the X clamp.