Wijzigingen aan stap #3
Bewerken voor Andrew Bookholt —
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_reminder] To reinstall the x clamp, first start by attaching two corners to the posts on the heatsink. |
| + | [* icon_reminder] While holding the third arm of the x clamp down against the post attached to the heat sink, use a small flathead screwdriver to pry the x clamp away from the heat sink post. |
| + | [* icon_reminder] As you pry, press down on the arm of the x clamp until you "walk" it down into the retaining groove cut into the post attached to the heat sink. |
| + | [* icon_note] Repeat this process for the fourth arm of the x clamp. |