Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Insert wisdom here.
+[* black] Insert your screwdriver parallel to the logic board between the x clamp and its retaining post.
+[* black] Twist the screwdriver to fully release the x clamp from its retaining post.
+[* icon_note] Repeat this process for all four corners of the x clamp.
+[* icon_caution] When removing the last corner of the x clamp and holding the logic board upside down, be sure to catch the CPU heatsink to avoid damage from it falling.