Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #22

Bewerking door Nicolas Siemsen

Bewerking goedgekeurd door Nicolas Siemsen

Voor
Na
Ongewijzigd

Stap regels

[* black] In the first picture, see the outside facing part of the chip that touches the heatsink. From the factory the top of the chip doesn't have any thermal compound on it. This is where I chose to add Arctic Silver thermal paste to help with the thermal protection of the chip. This is optional.
[* black] In the second picture you can see the defective mirror surface in the DLP chip. A good mirror surface should lookslook clean with a rainbow effect. This defective mirror shows many small spots.
[* black] In the third picture you can see the socket that the DLP chip fits in to. When installing your replacement shipchip it simply pushes in.
[* blackicon_caution] Be very careful not to touch the mirror surface of the chip. Also, if you see ANY dust on the mirror surface of the chip, remove it with canned air and/or a soft lint free cloth until it's perfectly clean.
[* black] In the second picture you can see the defective mirror surface in the DLP chip. A good mirror surface should lookslook clean with a rainbow effect. This defective mirror shows many small spots.
[* black] In the third picture you can see the socket that the DLP chip fits in to. When installing your replacement shipchip it simply pushes in.
[* blackicon_caution] Be very careful not to touch the mirror surface of the chip. Also, if you see ANY dust on the mirror surface of the chip, remove it with canned air and/or a soft lint free cloth until it's perfectly clean.