Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #19

Bewerking door Nicolas Siemsen

Bewerking goedgekeurd door Nicolas Siemsen

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert wisdom hereWith the heatsink bracket removed the DMD board can be removed from the rear cover.
[* black] It can help to start removing the board by pulling out on the upper right edge.
[* black] Then, pull on the right side of the board.
[* black] The board should then pivot out from the right. It is a snug fit but it should remove with care
.
[* black] Insert wisdom hereWith the heatsink bracket removed the DMD board can be removed from the rear cover.
[* black] It can help to start removing the board by pulling out on the upper right edge.
[* black] Then, pull on the right side of the board.
[* black] The board should then pivot out from the right. It is a snug fit but it should remove with care
.