Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Meghan

Bewerking goedgekeurd door Meghan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Once the device is disassembled, the antenna will be seen standing straight up.
[* black] The antenna can be removed
Begin by pulling it out fromtaking the casing it is sitting in insidebottom half of the device.
[* black] Be sure to grip
the antenna towards the bottom when removing it, otherwisedisassemled boombox and locating the antenna will begin to extend rather than loosen from its casingscrew.
[* black] The force required to removeWith the boombox laying flat and the handle face towards you, the antenna from its casing may vary from slight to moderate.
[* black] You
screw will not be located on the top left with an empty socket inof the device in whichdevice.
[* icon_note] The antenna screw is
the new antenna can be placedonly one without a parallel screw on the other side of the device.
[* black] Once the device is disassembled, the antenna will be seen standing straight up.
[* black] The antenna can be removed
Begin by pulling it out fromtaking the casing it is sitting in insidebottom half of the device.
[* black] Be sure to grip
the antenna towards the bottom when removing it, otherwisedisassemled boombox and locating the antenna will begin to extend rather than loosen from its casingscrew.
[* black] The force required to removeWith the boombox laying flat and the handle face towards you, the antenna from its casing may vary from slight to moderate.
[* black] You
screw will not be located on the top left with an empty socket inof the device in whichdevice.
[* icon_note] The antenna screw is
the new antenna can be placedonly one without a parallel screw on the other side of the device.