| - | [* black] Place the unit upside down on your work surface. Use a cloth or similar object to protect it from scratches. |
|---|
| - | [* black] Use a heat gun or hair dryer to heat the underside of the unit, in order to weaken the adhesives in the tape that hold it in place. |
|---|
| - | [* black] Start in a corner; it can be tricky to get a good grip at first. |
|---|
| - | [* icon_caution] Progress slowly so as not to tear the tape, but do not over heat the unit. |
|---|
| + | [* black] Place the unit upside down on your work surface. Use a cloth or similar to protect it from scratches. |
|---|
| + | [* black] Use a heat gun or hair dryer to heat the underside of the unit, in order to weaken the adhesives in the tape that hold the rubber base in place. |
|---|
| + | [* icon_caution] Start in a corner and lift the rubber base being careful not to tear it |
|---|
| + | [* icon_caution] Progress slowly and avoid tearing the adhesive tape while ensuring you don't over heat the unit. |
|---|