Ga door naar hoofdinhoud

Wijzigingen in stap #10

Bewerken voor Miroslav Djuric

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] After the logic boardmotherboard assembly is out, the reset and power button covers can easily be removed.
[* black] After the logic boardmotherboard assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing two inclined planes underneath the cartridge until it pops up off the connector attached to the board.