Ga door naar hoofdinhoud

Wijzigingen in stap #10

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom hereAfter the logic board assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing an inclined plane underneath the cartridge until it pops off the connector attached to the board
.
[* black] Insert wisdom hereAfter the logic board assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing an inclined plane underneath the cartridge until it pops off the connector attached to the board
.